The Tonguing and Grooving was a common choice of joining boards; in fact we can find many tools dedicated to this job. Is the case of this "combination" plane coming from UK.
Its marked "MOORE LIVERPOOL", Planemaker working between 1824 and 1870. It has the feature of having two blades, one for the tongue and another for cutting the groove, just turning the plane in the opposite direction. The fence is in the middle of plane body; in this choice the cut will be alchoices to the same distance from edge. This plane cuts in the center on 3/4" thick boards, but others were for different thickness. 
The plane needed some care, mainly in the mouth area where I preferred to close a little bit the opening, restoring the correct geometries. Moreover I had to substitute one wedge for which I used a cherry scrap. After the blades have been sharpened, the plane restarted to produce shavings with a good precision, unexpected for a such old tool.
The plane needed some care, mainly in the mouth area where I preferred to close a little bit the opening, restoring the correct geometries. Moreover I had to substitute one wedge for which I used a cherry scrap. After the blades have been sharpened, the plane restarted to produce shavings with a good precision, unexpected for a such old tool.
0 comments:
Post a Comment