I forgot to take any pictures while I was actually cutting it so here it is all cut up.
The first thing I did was to cut the back off.
I then cut the top and the bottom off.
Next were the sides which left me a chunk of wood from the middle.
I took that center chunk and cut the front and back off and hollowed out the center.
I then glued the top and bottom back onto the sides
The next step was to glue the drawer back together.
And then clamp it up
Once the glue was dry it was time to glue the back, back on.
I put that block in the front so the clamp would have something to push against.
The drawer should have been the same size as those side pieces but was a smidge larger so I sanded it down to size with the disk sander
Here is what the final piece looks like.
Now that I know how to do it I am going to make a bigger and nicer one.
?
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment